Ever wondered how printers figure out roughly how much ink they’ll need for a really long print run?
Whether it’s extensive packaging, wallpaper, or large promotional materials, knowing ink consumption is key for estimating costs and ensuring enough supplies are on hand. While actual printing always uses a bit more ink due to various factors, we can make a solid theoretical calculation. Let’s walk through an example using metric units, breaking it down step by step for clarity.
The Printing Task
Imagine we have this specific printing task:
We’re printing on a roll of material that is 0.5 meters wide (half a meter).
The total length of the material we need to print is a substantial 60,000 meters.
We are doing a “flood coat,” which simply means covering the entire width with a solid layer of ink.
The special roller carrying the ink (the anilox roller) is designed to hold 6 cubic centimeters (cc) of ink for every square meter of its surface (6 cc/m²). Think of it as having tiny pockets that hold a specific amount of ink.
It is estimated that only 25% of the ink present on the roller is actually transferred to the material. The rest remains within the printing system.
The estimate that only 25% of the ink on the anilox roller is transferred to the material is based on the physical mechanics of the flexographic printing process. This is not a defect, but rather an intrinsic characteristic of how ink moves from one surface to another. Here are the details:
Anilox Cell Structure: The anilox roller isn’t smooth; it’s engraved with millions of microscopic cells or ”pockets” that hold the ink. A ‘doctor blade’ scrapes the roller’s surface, ensuring ink is only in these cells.

Ink Splitting: When the anilox roller makes contact with the raised image area on the printing plate, the ink film within the cells must ‘split’. A portion of the ink transfers to the plate, but a significant portion remains adhered to the walls and bottom of the anilox cells due to surface tension and viscosity. Complete evacuation of the cells is physically impossible.

Second Transfer: A similar ink-splitting process occurs when the printing plate, now carrying the ink, presses against the material (substrate). Not all the ink on the plate transfers perfectly to the final material; some remains on the plate.
Combined Inefficiency: The ‘25% transfer efficiency’ is a practical, experience-based estimate that accounts for the cumulative effect of these two transfer points (anilox-to-plate and plate-to-substrate). This value can fluctuate based on ink viscosity, press speed, pressure settings, and the surface properties of the plate and the material being printed, but 25% serves as a reliable rule-of-thumb for initial calculations.
How much ink do we theoretically need?
Step 1: Figure out the total area we’re printing
This is the total surface we need to cover with ink.
Area = Width × Length
Area = 0.5 meters × 60,000 meters = 30,000 square meters (m²)
The total area to be printed remains 30,000 square meters.
Step 2: How much ink actually lands on each square meter?
The anilox roller holds 6 cc/m², but only 25% transfers to the material.
Ink Delivered per area = Anilox volume × Transfer efficiency
Ink Delivered per area = 6 cc/m² × 0.25
Ink Delivered per area = 1,5 cubic centimeters per square meter (cc/m²)
This amount applied per square meter stays the same, regardless of the total job length.
Step 3: Calculate the total ink volume needed (in cc)
Now we combine the large total area with the amount of ink used per square meter.
Total Ink Volume = Total Area × Ink Delivered per Area
Total Ink Volume = 30,000 m² × 1,5 cc/m²
Total Ink Volume = 45.000 cubic centimeters (cc)
Step 4: Making it Practical – Converting to Liters
Ink is typically handled in Liters. Since 1 Liter equals 1000 cubic centimeters:
Volume in Liters = Total Ink Volume (cc) / 1000
Volume in Liters = 45.000 cc / 1000
Volume in Liters = 45 Liters
Our calculation shows that, theoretically, this very long print job requires 45 liters of ink.
Alternative printing task
Now, let’s consider a different scenario. Instead of a solid ‘flood coat’, we use the same machine and material roll to print the entire surface with continuous text in Arial font, size 10. The key difference is that the ink no longer covers 100% of the area.
A full page of standard 10pt text is mostly white space. We must estimate what percentage of the surface is actually covered by ink. A reasonable estimate for dense text is approximately 5% coverage. This is the crucial new variable in our calculation.
By simply changing the print from a solid coat (100% coverage) to dense text (estimated 5% coverage), the theoretical ink requirement drops dramatically from 45 liters to just 2,25 liters. This demonstrates why image area coverage is one of the most critical factors in estimating ink consumption.
Theoretical Calculation vs. Reality
These numbers represent only the ink that should end up on the printed product itself in a perfect scenario. However, it’s crucial to remember this is the bare minimum.
Real-world printing always consumes more ink because this calculation doesn’t account for:
• Ink used during the initial setup (makeready) phase while adjusting the press and colors.
• Any ink that might be spilled or used during cleaning stops.
• The significant amount of ink left coating the inside of pumps, hoses, ink pans or chambers, and the rollers themselves when the job is completed and the press is cleaned.

Therefore, this calculation provides the essential baseline ink volume needed purely for the printed image area. Printers use this figure as a critical starting point for planning and ordering supplies. They will always factor in an additional percentage, based on their experience with that specific press, ink system, and job type, to cover all the practical, real-world ink usage that goes beyond the theoretical minimum.
So, while the math points to 45 liters for a “flood coat” and to 2,25 for dense text, a printer would plan to have more ink available to successfully complete these jobs.
Written by Sergio G. | Team Giugni®


