Printpress 522



Pharmaceutical Medical Biomedical


Plastics Bioplastics

Print the product
Technical specifications
No. of print colours


Printing width (min)

250 mm

Printing width (max)

300 mm

Printing height/repeat (min)

250 mm

Printing height/repeat (max)

700 mm

Print cycles

20 cicli/m

Type of printing

Flexo UV


Motor powered

Flexographic inking

Ceramic Anilox

Drying system

Product details

Printing area: 250÷300 x 250÷700 mm.
Max speed: 20 cycles/min.
Notes: Suitable to print on plastic materials. Designed for biomedical and pharmaceutical fields.

Printpress 522 has been conceived for the reciprocating single color print on PVC film using UV inks approved by Giugni S.r.l.
An inking unit transfers the ink on the cliché shifting from one side to the other of the printing plate thanks to a couple of linear actuators driven by a motoreducer.
The inking roll (Anilox) is a ceramic-coated roll which is laser-engraved with microcells that contain the needed ink quantity.
Two doctor blades on both sides of the ink reservoir evenly distribute the ink on the anilox.
The anilox is driven by a geared wheel which shifts on a rack during the inking process.
A rubber roll catches the ink from the reservoir thanks to the movement given by the contact with the anilox roll.
The cliché is fitted on an aluminium plate through two lateral guides which allow its shifting into position. It is then blocked with four pneumatic clamps.